Red LED 2X Micro Effects Light splitter cable 9V for prop scenery MELKIT2R

Description

2 pcs Red LED MELs Micro Effects Light
&
1 pc 2 Way Splitter
&
1pc 9 volt battery clip
*** Batteries Not included ***
Easy assembly; plugs together and operates on 9 volt battery
The MEL LED Lights are
Spotlights to accent and light small objects
Scenery / Props / Models / Animatronics / Robotics
Fx- Special effects / costumes
Theatrical stage and set obstruction marking
Theming, décor lighting and promotion display products
Amusement, arcade, gaming and entertainment lighting
Specialty miniature accent lighting
Technical Info:
The MEL (Micro Effects Light) is a series of simple low cost LED light sources with a built in DC barrel type connector.
The 2.1 x 5.5mm barrel connector is very common for many low voltage DC power applications simplifying the building of a micro effects lighting system in a modular fashion. The MEL operates from 9 – 12 volts DC which allows a simple effects system operating from a 9 volt battery possible.
Each MEL is optimized for high light output at 9 volts DC with a nominal power of 0.18 watts operating at 20ma ref. The LED lens is water clear with a 30 degree output angle for a narrow beam.
The axial body of the MEL LED is of a small size and molded in black ABS resin. The MEL body overall length is 1.42” (36mm) and the diameter is 0.48” (12.2mm) nominal.
MEL Light Specs:
Characteristics
1) DC Barrel Connector female Jack accepts 2.1mm x 5.5mm plug with center positive.
2) Body shell: ABS (black).
3) Volts DC (VDC): 9-12 nominal (continuous), Max 12.5
4) Current (ref.): 20ma @ 9 VDC, 28ma @ 12 VDC, 35ma Max.
5) Power (nominal): 0.18 watts at 9 VDC, 0.34 watts at 12 VDC, 0.44 watts Max.
6) Output: Pure Red (high intensity, 30 degree lens, clear)
7) Color Coordinates CIE1931: x=0.65 / y=0.31
Notes / Cautions
1) Intense light source, for eye safety do not look directly into the beam at close range.
2) This lighting device is static sensitive, retain protective shipping bag for storage to protect from ESD (Electro Static Discharge) damage.
3) Observe correct polarity when connecting power, damage may result from unintended reverse polarity.
4) Device meets Rohs requirements
Adapter Connectors for Power